All the parts shown on these pages are strictly for OFF ROAD USE ONLY.
 

© Copyright 2016 Strada Avventurosa, all rights reserved.  The terms 'Ducati', 'Multistrada', 'Hypermotard', 'Cagiva', and 'Gran Canyon' are used for reference only, and imply no affiliation or endorsement whatsoever.

 

Please note

The SB-1 Slider Bars and CM-1 Case Mounts are no longer in production,

and there are no plans to reintroduce them,

due to low demand/high production costs.

SG-1 Sump Guard for:
2003-2009 Multistrada 1000/1100
2008-2012 Hypermotard 1100

 

$135.00

 

In stock

Made from 0.105" 304 stainless steel, waterjet cut, CNC formed, and TIG welded, with a vibratory finish.  Comes complete with stainless mounting hardware and instructions.  Protects the engine sump, starter, and oil filter.​

NOTE: 2008 Model year bikes will require drilling and tapping the mounting bosses in the horizontal cylinder head.  This does not require removal of the cylinder, and the installation instructions provide more specific detail.

SG-2 Sump Guard for: Multistrada 620 ONLY
$135.00

 

In stock

Made from 0.105" 304 stainless steel, waterjet cut, CNC formed, and TIG welded, with a vibratory finish.  Comes complete with stainless mounting hardware and instructions.  Protects the engine sump, starter, and oil filter.​

SG-3 Sump Guard: 1998-2000 Cagiva Gran Canyon
$150.00

 

Special order, allow 3-4 weeks

Made from 0.120" 304 stainless steel, waterjet cut, CNC formed, and TIG welded, with a vibratory finish.  Comes complete with stainless mounting hardware and instructions.  Protects the vulnerable fuel pump and lines unique to the GC, as well as the engine sump, starter, and oil filter.

CM-2 License Adapter for: 2003-2009 Multistrada (all)
$80.00

 

In stock

Required to provide clearance to the CM-1 main latch, only if you have the stock, Termignoni, or Staintune muffler.  Made from 304 stainless steel, in a vibratory finish, with hardware.

CM-3 Case Mount for: 2010-2014 Multi 1200
$325.00

 

In stock

Welcome to the next generation of our quick-disconnect case mounts!  Our new system for the 'Gen 2' Multi is one of the simplest, most durable & flexible setups on the market, and retains all the revolutionary features of the CM-1:

 

- The case mounting brackets fasten directly to the bags, NOT the bike.

- Our CM-3 works with any imaginable case: Pelicans, Jesse’s, ammo cans, etc.

- The cases attach/detach from the bike in seconds, without fussy little latches.

 

In addition:

 

- The CM-3 system comes with keyed-alike brass padlocks, which are durable, easily replaced, and an integral part of the system.

- The aluminum framework is specially heat treated, post-fabrication, for incredible durability.

- Our system accommodates any exhaust, and provides heat protection for the right side case.

- All pieces in the CM-3 kit are either stainless or aluminum.

 

As before, we’ve built the system to work with Pelican cases in particular, because they’re everything the factory cases aren’t but should be: tip-over durable, inexpensive, waterPROOF, and widely available.  We recommend the Pelican 1500, 1520, or 1550, or their Caribou Case equivalent(s).

 

It just doesn’t get any easier: Unlock, lift, and you’re done!

 

Note:  Although the rear bodywork is not shown in the photos, it can still be re-fitted with the CM-3 brackets in place.

LM-1 Light Mount for: 2003-2009 Multistrada (all)
$130.00

 

In stock

Finally, a solution for mounting wide-beam-pattern lights to a Multistrada! The LM-1 splays them at a 10 degree angle off center, further widening the illumination pattern.  The LM-1 can also accommodate a wide variety of lights, to suit one's individual taste.  For reference, the PIAA 510ATP light bodies (shown, not included) are spaced roughly 12mm from the front of the oil cooler, and do not seem to significantly impact oil temperature. 

In addition, the sides of the LM-1 are now drilled to accommodate small, stalk-type aftermarket turn signals.

 

Here's what a customer posted to multistrada.net:
"I don't have any pics of the extra lighting but it's almost like having 2 more headlights. Soon after installing them I rode for hours on a dark night on my way home. I shut the PIAAs off to see what the difference was and was shocked- I couldn't believe that I ever rode without them. They make the bike WAY more visible in daytime too, which is why I originally got them."

FM-1 Fender Mount for: 2003-2009 Multistrada (all)
$55.00

 

In stock

The Fender Mount is constructed from 304 stainless steel and comes in a vibratory finish.  Also included are stainless screws, washers, and nylock nuts to mount the fender of your choice, such as the Acerbis Supermoto (shown, not included) or the KTM Supermoto.

 

The FM-1 attaches using existing threaded holes in the lower triple clamp with the stock hardware.

 

NOTE: It is highly recommended that you protect the lower fork legs with our FG-1 kit after you remove the stock front fender (below.)

FG-1 Fork Guards for: 2003-2009 Multistrada (all)
$80.00

 

In stock

The Fork Guards are constructed from 304 stainless steel in a vibratory finish.  They are designed to protect the lower fork sliders from getting damaged once the stock fender is replaced with the FM-1 & off-road style fender.


Mounting hardware is included, and can be painted/powdercoated by the customer.

LM-1 Front View (Also shown: LM-1, FM-1, FG-1, SB-1)